Table 4: Interface Types And Specifiers For E120 Router And E320 Router - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

Copyright © 2010, Juniper Networks, Inc.

Table 4: Interface Types and Specifiers for E120 Router and E320 Router

Interface Type Description
atm ATM
interface or
ATM 1483
subinterface
ATM interface or
subinterface
ATM 1483
subinterface
Chapter 1: Command Reference Topics
Interface Specifier
Refer to the individual formats listed below.
To configure an ATM interface or subinterface:
slot/adapter/port[.subinterface ]
slot—Number of the chassis slot in the range
0–5 (E120 router) and 0–5 or 11–16 (E320
router)
adapter—Identifier for the IOA within the
chassis slot, either 0 or 1, where:
0 indicates that the IOA is installed in the
right IOA bay (E120 router) or the upper IOA
bay (E320 router).
1 indicates that the IOA is installed in the
left IOA bay (E120 router) or the lower IOA
bay (E320 router).
port—Port number on the IOA
subinterface—Number of the subinterface in
the range 1–2147483647
To display information about an ATM 1483
subinterface by using show commands:
slot/adapter/port/vpi/vci
slot—Number of the chassis slot in the range
0–5 (E120 router) and 0–5 or 11–16 (E320
router)
adapter—Identifier for the IOA within the
chassis slot, either 0 or 1, where:
0 indicates that the IOA is installed in the
right IOA bay (E120 router) or the upper IOA
bay (E320 router).
1 indicates that the IOA is installed in the
left IOA bay (E120 router) or the lower IOA
bay (E320 router).
port—Port number on the IOA
vpi—Virtual path identifier of the PVC on this
ATM 1483 subinterface; numeric range for the
E120 and E320 routers is 0–255
vci—Virtual circuit identifier of the PVC on this
ATM 1483 subinterface; numeric range for the
E120 and E320 routers is 1–65535
Example
atm 3/1/7.6
atm 3/1/7/1/2
13