pppoe-service-name-table
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] pppoe-service-name-table tableName
Command introduced before JunosE Release 7.1.0.
Creates a PPPoE service name table and accesses PPPoE Service Name Table
Configuration mode, which enables you to configure entries for the PPPoE service name
table. PPPoE clients use the entries in a PPPoE service name table to request that an
AC, such as an E Series router, support certain services. The no version removes the
specified PPPoE service name table from the router.
tableName—Name of the PPPoE service name table; string of up to 31 alphanumeric
characters
Global Configuration
Chapter 4: P Commands
255