Rtr Reaction-Configuration Path-Change - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

rtr reaction-configuration path-change

Syntax
Release Information
Description
Options
Mode
418
rtr reaction-configuration rtrIndex path-change
Command introduced before JunosE Release 7.1.0.
Enables path change reaction. When the type of RTR entry is echo, you cannot configure
the path-change trap. There is no no version. See the no rtr reaction-configuration
command.
rtrIndex—Number of the operation to be configured, in the range 1–4294967295; no
default
Global Configuration
Copyright © 2010, Juniper Networks, Inc.