JunosE 11.3.x Command Reference Guide N to Z
redistribute isis
Syntax
Release Information
Description
Options
Mode
368
[ no] redistribute isis from { level-1 into level-2 | level-2 into level-1 }
route-map mapTag
Command introduced in JunosE Release 8.2.0.
Redistributes IPv6 routes from one IS-IS routing level into the other. The no version ends
the redistribution.
level-1—Specifies the redistribution of routes from or into IS-IS level 1
level-2—Specifies the redistribution of routes from or into IS-IS level 2
mapTag—String of up to 32 alphanumeric characters specifying the route map applied
to all routes from the source protocol; if you do not specify a route map, all routes are
redistributed
Address Family Configuration
Copyright © 2010, Juniper Networks, Inc.