Set Dhcp Relay Options - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

set dhcp relay options

Syntax
Release Information
Description
Options
Mode
486
set dhcp relay options { hostname | vrname | exclude-subinterface-id }
no set dhcp relay options [ hostname | vrname | exclude-subinterface-id ]
Command introduced before JunosE Release 7.1.0.
Configures the relay agent option 82 information that the router adds to DHCP packets
before it relays the packets to the DHCP server. You can add either the E Series hostname
or the virtual router name to the front of the Circuit-Id field. You cannot add both hostname
and virtual router name. The last option specified is the one in use. You can also strip the
subinterface ID from the Interface-Id field. The no version returns to the default, in which
no information is added to the Circuit-Id field and/or the subinterface ID is not stripped
from the interface string.
hostname—Adds the router's hostname to the front of the Circuit-Id field; the hostname
is separated from the circuit information by a colon
vrname—Adds the router's virtual router name to the front of the Circuit-Id field; the
virtual router name is separated from the circuit information by a colon
exclude-subinterface-id—Strips the subinterface ID from the Interface-Id field
Global Configuration
Copyright © 2010, Juniper Networks, Inc.