Show Gre Tunnel - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show gre tunnel

Syntax
Release Information
Description
Options
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
show gre tunnel [ detail ] [ state tunnelStatus ]
[ tunnelName | [ virtual-router vrName ] ip ipAddress ] [ filter ] [ summary ]
To display summary information:
show gre tunnel summary [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays information about GRE tunnels.
detail—Shows detailed tunnel information about GRE tunnels
tunnelStatus—State of tunnels for which information is displayed; one of the following:
disabled—Tunnel is disabled
down—Tunnel is not operational
enabled—Tunnel is enabled
lower-down—Interface layer lower below the tunnel is not operational
not-present—Tunnel service module is not in slot
up—Tunnel is operational
tunnelName—Name of a tunnel for which you want to display information
vrName—Name of a virtual router for which tunnel information is displayed
ipAddress—IP address associated with tunnel
filter—See Filtering show Commands on page 4
summary—Displays summary information
Privileged Exec
Monitoring GRE Tunnel Information
Chapter 7: S Commands
693