JunosE 11.3.x Command Reference Guide N to Z
privilege level
Syntax
Release Information
Description
Options
Mode
272
privilege level levelValue
no privilege level
Command introduced before JunosE Release 7.1.0.
Sets the default login privilege level of the console line or one or more vty lines. The no
version restores the default login privilege level for the command.
NOTE: You must access the CLI at privilege level 15 to view or use this
command.
levelValue—Level in the range 0–15 at which you want the command accessible
Line Configuration
Copyright © 2010, Juniper Networks, Inc.