Neighbor Remove-Private-As - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

neighbor remove-private-as

Syntax
Release Information
Description
Options
Mode
56
[ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName } remove-private-as
Command introduced before JunosE Release 7.1.0.
ipv6Address variable added in JunosE Release 8.0.0.
Removes private AS numbers in updates sent to external peers. Private AS numbers are
only in the range 64,512–65,535. The no version halts removing private AS numbers. The
default version removes the explicit configuration from the peer or peer group and
reestablishes inheritance of the feature configuration.
ipAddress—IP address of BGP neighbor
ipv6Address—IPv6 address of BGP neighbor
peerGroupName—Name of a BGP peer group. If you specify a BGP peer group by using
the peerGroupName argument, all the members of the peer group inherit the
characteristic configured with this command. You cannot override the characteristic
for a specific member of the peer group.
Address Family Configuration, Router Configuration
Copyright © 2010, Juniper Networks, Inc.