Show Ip Nat Translations - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show ip nat translations

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
show ip nat translations [ static | dynamic ] [ gre | icmp | tcp | udp ]* [ verbose ]
[ filter ]
show ip nat translations inside insideLocalIpAddress [ localPort ]
[ insideGlobalIpAddress [ globalPort ] ] [ verbose ] [ filter ]
show ip nat translations outside outsideGlobalIpAddress [ globalPort ]
[ outsideLocalIpAddress [ localPort ] ] [ verbose ] [ filter ]
Command introduced before JunosE Release 7.1.0
gre keyword added in JunosE Release 7.3.0.
Displays translations that reside in the NAT translation table.
static—Displays static translations
dynamic—Displays dynamic translations
tcp—Displays TCP port translations
udp—Displays UDP port translations
icmp—Displays ICMP port translations
gre—Displays GRE translations
*—Indicates that you can specify one or more protocol keywords, in any order, in a list
in the command line
inside—Specifies an inside address
insideLocalIpAddress—Inside local IP address
localPort—Local port value
insideGlobalIpAddress—Inside global IP address
globalPort—Global port value
outside—Specifies an outside address
outsideGlobalIpAddress—Inside global IP address
outsideLocalIpAddress—Inside local IP address
verbose—Additionally displays the time since creation and time since last use for each
translation entry
filter—See Filtering show Commands on page 4
User Exec
Chapter 7: S Commands
829