Show Ipv6 Mroute - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show ipv6 mroute

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
show ipv6 mroute [ groupIpAddress [ sourceIpAddress ] ]
[ summary | count | statistics ] [ active [ bandwidth ] ] [ filter ]
Command introduced before JunosE Release 7.1.0.
active keyword added in JunosE Release 8.1.0.
Displays information about all or specified multicast routes.
groupIpAddress—IPv6 address of a multicast group
sourceIpAddress—IPv6 address of a multicast source
summary—Displays brief information about the multicast routes
count—Displays the number of groups and sources
statistics—Displays statistics for packets received through multicast routes that the
router has added to the multicast routing table and established on the appropriate
line modules
active—Displays active mroutes
bandwidth—Admission bandwidth for active multicast routes that is greater than the
specified bandwidth threshold; default is 4000 bps
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Chapter 7: S Commands
921