Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual page 1052

JunosE 11.3.x Command Reference Guide N to Z
Mode
1010
local—Displays only local labels
remote—Displays only remote labels
atm—Displays the specified ATM VPI/VCI labels
vpi—Specifies ATM VPI that partially designates a label
vci —Specifies ATM VCI that partially designates a label
explicit-null-label—Displays binding information for the explicit null label
implicit-null-label—Displays binding information for the implicit null label
labelNumber—Label for which binding information is displayed; number in the range
16–1048575
labelRangeEnd—Label designating the high end of a range of labels for which binding
information is specified; number in the range 16–1048575
brief—Displays limited information
filter—See Filtering show Commands on page 4
layer2-vc—Displays binding information for layer 2 over MPLS
vcType—One of the following types of virtual circuit over MPLS for which binding
information is displayed: aal5-vcc, ethernet, frame-relay, vlan
vcId—Virtual circuit identifier, number in the range 1–4294967295
Privileged Exec, User Exec
Copyright © 2010, Juniper Networks, Inc.