Router-Name - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

router-name

Syntax
Release Information
Description
Options
Mode
410
router-name vrName
no router-name [ vrName ]
Command introduced before JunosE Release 7.1.0.
Maps a virtual router to a user domain name. The no version deletes the router name
parameter, and the router defaults to the default virtual router.
NOTE: This command is deprecated and might be removed completely in a
future release. The functionality provided by this command has been replaced
by the auth-router-name and ip-router-name commands.
vrName—Name of the virtual router to map to the user domain name
Domain Map Configuration, Tunnel Group Tunnel Configuration
Copyright © 2010, Juniper Networks, Inc.