JunosE 11.3.x Command Reference Guide N to Z
retransmit-interval
Syntax
Release Information
Description
Options
Mode
396
retransmit-interval retransInterval
no retransmit-interval
Command introduced before JunosE Release 7.1.0.
Specifies the time between LSA retransmissions for the OSPF remote-neighbor interface
when an acknowledgment for the LSA is not received. The no version restores the default
value.
retransInterval—Number of seconds, in the range 0–3600; default value is 5
Remote Neighbor Configuration
Copyright © 2010, Juniper Networks, Inc.