Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual page 369

Copyright © 2010, Juniper Networks, Inc.
tunnel-type—Includes RADIUS attribute 64, Tunnel-Type
upstream-calculated-qos-rate—Includes RADIUS attribute 26-142,
Upstream-Calculated-Qos-Rate
Attributes available for Access-Request messages only:
access-loop-parameters—Includes RADIUS attribute 26-81, L2c-Information
Attributes available for Acct-Start and Acct-Stop messages only:
acct-link-count—Includes RADIUS attribute 51, Acct-Link-Count
class—Includes RADIUS attribute 25, Class
egress-policy-name—Includes RADIUS attribute 26-11, Egress-Policy-Name
framed-compression—Includes RADIUS attribute 13, Framed-Compression
framed-ip-netmask—Includes RADIUS attribute 9, Framed-IP-Netmask
framed-route—Excluded by default; includes RADIUS attribute 22, Framed-Route
ingress-policy-name—Includes RADIUS attribute 26-10, Ingress-Policy-Name
tunnel-assignment-id—Includes RADIUS attribute 82, Tunnel-Assignment-Id
tunnel-preference—Includes RADIUS attribute 83, Tunnel-Preference
Attributes available for Acct-Stop messages only:
delegated-ipv6-prefix—Excluded by default; includes RADIUS attribute 123,
Delegated-Ipv6-Prefix
framed-ipv6-pool—Excluded by default; includes RADIUS attribute 100,
Framed-IPv6-Pool
framed-ipv6-route—Excluded by default; includes RADIUS attribute 99,
Framed-IPv6-Route
input-gigapkts—Includes RADIUS attribute 26-35, Acct-Input-Gigapackets
input-gigawords—Includes RADIUS attribute 52, Acct-Input-Gigawords
ipv6-accounting—Excluded by default; includes the following RADIUS attributes:
IPv6-Acct-Input-Octets [26-151]
IPv6-Acct-Output-Octets [26-152]
IPv6-Acct-Input-Packets [26-153]
IPv6-Acct-Output-Packets [26-154]
IPv6-Acct-Input-Gigawords [26-155]
IPv6-Acct-Output-Gigawords [26-156]
Chapter 6: R Commands
327