Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual page 116

JunosE 11.3.x Command Reference Guide N to Z
Mode
74
asNumber—AS number for origin of route target information, in the range
1–4294967295
extendedCommunity—Two-part number in the format number1:number2 that identifies
an extended community of VPNs, in the format number1 : number2, where:
number1—Autonomous system (AS) number, in the range 1–4294967295, or an
IP address
number2—Unique integer, in the range 1–4294967295; 32 bits if number1 is a 16-bit
AS number; 16 bits if number1 is an IP address or a 32-bit AS number
prefixLength—Number that specifies the length of the route prefix, in the range 32–96
mapTag—Name of the route map; a string of up to 32 alphanumeric characters; does
not currently work with rtMemNlri
weight—Number in the range 0–65535; default value is 32768; assigns an absolute
weight to the network route that overrides a weight assigned by the redistribute
command
backdoor—Lowers the preference of an EBGP route to the specified prefix by setting
the administrative distance to the value of an internal BGP route. Use this option to
favor an IGP backdoor route over an EBGP route to a specific network. BGP does not
advertise the prefix specified with this option.
networkAddress—IP address of the network
prefix—Network prefix
force—Deletes address pool even if the pool is in use
Address Family Configuration (BGP, RIP), DHCP Local Pool Configuration (for DHCP
local server), Router Configuration (BGP, RIP)
Copyright © 2010, Juniper Networks, Inc.