Table of Contents
Advertisement
JunosE 11.3.x Command Reference Guide N to Z
show ip bgp summary
Syntax
Release Information
Description
Options
762
show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName |
l2vpn all | l2vpn vpls vplsName | l2vpn vpws vpwsName | route-target signaling ]
summary [ fields fieldOptions ] [ delta ] [ filter ]
Command introduced before JunosE Release 7.1.0.
l2vpn and all keywords added in JunosE Release 7.1.0.
vpls keyword and vplsName variable added in JunosE Release 7.1.0.
vpws keyword and vpwsName variable added in JunosE Release 8.1.0.
route-target signaling keywords added in JunosE Release 8.2.0.
Displays filtered information about the status of all BGP connections. Only those fields
that you specify are displayed, except that the prefix field is always displayed. Default
fields can be set with the default-fields peer command.
ipv4 unicast—Specifies the IPv4 unicast address family and routing table; the default
option
ipv4 multicast—Specifies the IPv4 multicast address family and routing table
vpnv4 all—Specifies the IPv4 VPN address family and all IPv4 VPN routing and
forwarding instances
vpvn4 vrf vrfName—Specifies the IPv4 VPN address family and only the IPv4 VPN
routing and forwarding instance with the name vrfName
l2vpn all—Specifies all VPLS and VPWS instances in the L2VPN address family
l2vpn vpls vplsName—Specifies the VPLS instance with the name vplsName
l2vpn vpws vpwsName—Specifies the VPWS instance with the name vpwsName
route-target signaling—Displays information for only the route-target address family
fields—Displays only the specified fields; the display order of the fields is hard-coded
and not affected by the order in which you enter them
fieldOptions—Fields to be displayed, in the format
all | [ dynamic | intro | last-reset-reason | messages-received | messages-sent |
more-in-queue | peer-type | prefixes-received | remote-as | rib-version |
send-queue-length | state | times-up | up-down-time | updates-received | updates-sent
]*
dynamic —Nature of peer, dynamic or not
intro—Introductory information about the state of various BGP attributes; this
information is displayed only if you specify this keyword
last-reset-reason—Reason for most recent reset
messages-received—Total number of messages received from the peer
messages-sent—Total number of messages sent to the peer
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
