Show L2Tp Destination - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show l2tp destination

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
show l2tp destination [ detail ] [ destinationName |
[ virtual-router vrName ] ip ipAddress ] [ filter ]
show l2tp destination summary [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays information about selected L2TP destinations.
detail—Provides complete information about the specified destinations, including
destination profiles
destinationName—Name the router assigns to the peer at the other end of the tunnel
vrName—Name of the virtual router on which the destination exists
ipAddress—IP address of the peer at the other end of the tunnel
summary—Displays a summary of destination profile configuration
filter—See Filtering show Commands on page 4
Privileged Exec
Chapter 7: S Commands
971