Redundancy Revert - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

redundancy revert

Syntax
Release Information
Description
Options
Mode
374
[ no ] redundancy revert slotNumber
[ startTime [ [ startMonth startDay | startDay startMonth ] startYear ] ]
Command introduced before JunosE Release 7.1.0.
Forces the router to revert to the primary line module in the specified slot. If you specify
a time or time and date, reversion occurs when the primary line module becomes available
after that time. Otherwise, reversion occurs immediately. Issuing this command causes
reversion once; after reboot, the router returns to the settings configured in the software.
The no version has no effect.
slotNumber—Number of the slot in which the primary line module resides
startTime—Time, in 24-hour format (00:00:00), at which the router reverts to this line
module
startMonth—Name of the month in which the router reverts to this line module
startDay—Day of the month on which the router reverts to this line module
startYear—Four-digit year in which the router reverts to this line module
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.