Table of Contents
Advertisement
neighbor default-originate
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
neighbor { ipAddress | ipv6Address | peerGroupName } default-originate
[ route-map mapTag ]
{ no | default } neighbor { ipAddress | ipv6Address | peerGroupName } default-originate
[ route-map [ mapTag ] ]
Command introduced before JunosE Release 7.1.0.
ipv6Address variable added in JunosE Release 8.0.0.
Allows a BGP speaker (the local router) to send the default route 0.0.0.0/0 to a neighbor
for use as a default route. When you issue this command in the route-target address
family, BGP advertises the Default-RT-MEM-NLRI route (0:0:0/0). The no version halts
sending a default route to the neighbor. The default version removes the explicit
configuration from the peer or peer group and reestablishes inheritance of the feature
configuration.
ipAddress—IP address of BGP neighbor
ipv6Address—IPv6 address of BGP neighbor
peerGroupName—Name of a BGP peer group. If you specify a BGP peer group by using
the peerGroupName argument, all the members of the peer group inherit the
characteristic configured with this command. You cannot override the characteristic
for a specific member of the peer group.
mapTag—Name of route map applied to modify the attributes of the default route or
to filter the default route; string of up to 32 characters
Address Family Configuration, Router Configuration
Chapter 2: N Commands
33
Advertisement
Table of Contents
