Table of Contents
Advertisement
JunosE 11.3.x Command Reference Guide N to Z
path trigger alarm prdi
Syntax
Release Information
Description
Options
Mode
182
For channelized OCx/STMx interfaces:
[ no ] path pathChannel trigger alarm prdi
For unchannelized OCx/STMx interfaces:
[ no ] path trigger alarm prdi
Command introduced before JunosE Release 7.1.0.
Specifies that the router uses remote defect indications (RDIs) at the path layer to
determine the operational state of a path. The no version restores the default setting, in
which loss of pointer and alarm indication signal (AIS) defects at the path layer determine
the operational state of a path.
pathChannel—Number, in the range 1–2147483648, that identifies the path on a
channelized interface
Controller Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
