Samples-Of-History-Kept - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

samples-of-history-kept

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
samples-of-history-kept samples
no samples-of-history-kept
Command introduced before JunosE Release 7.1.0.
Sets the number of entries kept in the history table for each RTR operation. The no version
restores the default value.
samples—Number of entries for each RTR index in the history table; default value is 16
for a pathEcho type and 1 for an echo type
RTR Configuration
Chapter 7: S Commands
429