Table of Contents
Advertisement
JunosE 11.3.x Command Reference Guide N to Z
show ip tunnel-route
Syntax
Release Information
Description
Options
Mode
876
show ip tunnel-route [ vrf vrfName ] [ destination [ ipMask ] [ detail ] ]
[ all ] [ protocol ] [ filter ]
Command introduced in JunosE Release 7.1.0.
Displays current state of the IPv4 tunnel routing table.
vrfName—Contents of the IPv4 tunnel routing table associated with a VRF
destination—IP address or domain name of the host to show
ipMask—IP mask of the specific address to show
detail—Displays detailed information about the specific prefix
all—Displays all routes in the IPv4 tunnel routing table inserted from all protocols, not
just the best routes
protocol—One of the following protocols for which you want to display the best route
or all routes in the tunnel routing table; no routes are displayed if routes for the specified
protocol are not present in the tunnel routing table
NOTE: Other protocol options are available in the CLI, but they are not
applicable to the tunnel routing table.
bgp-tunnel—Displays the BGP tunnel routes in the tunnel routing table
ldp—Displays the LDP tunnel routes in the tunnel routing table
rsvp—Displays the RSVP tunnel routes in the tunnel routing table
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 and is the answer not in the manual?
Questions and answers