JunosE 11.3.x Command Reference Guide N to Z
ppp fragmentation
Syntax
Release Information
Description
Options
Mode
216
ppp fragmentation [ fragmentSize ]
no ppp fragmentation
Command introduced before JunosE Release 7.1.0.
Enables fragmentation on an MLPPP link interface and optionally specifies the maximum
fragment size, in octets, to be used on the link. The no version disables fragmentation on
the link and restores the default fragment size, which is the link's MTU.
fragmentSize—Maximum allowable size of the fragment, in the range 128–65535; the
default fragment size is the link's MTU
Interface Configuration, Profile Configuration, Subinterface Configuration
Copyright © 2010, Juniper Networks, Inc.