Next-Hop - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

next-hop

Syntax
Release Information
Description
Options
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
[ no ] [ suspend ] next-hop address [ classifier-group claclName ]
[ precedence precValue ]
Command introduced before JunosE Release 7.1.0.
Defines the IP address of the next hop for an IP policy list. The no version removes a
next-hop rule from a policy list; the suspend keyword temporarily suspends the rule; the
no suspend version resumes application of a suspended rule.
NOTE: The next-hop command has been replaced by the forward next-hop
command and may be removed completely in a future release.
The SRP module Fast Ethernet port cannot be the destination of the next-hop
command.
address—IP address for the next hop
claclName—In Policy List Configuration, specifies the classifier control list used to
classify packets for this next-hop policy. If you do not specify a classifier group, the
router selects all packets from the interface associated with this policy list for this rule.
precValue—In Policy List Configuration, specifies the precedence of this rule in relation
to other rules within this set
Classifier Group Configuration, Policy List Configuration
Policy Rule Precedence
Chapter 2: N Commands
77