Table of Contents
Advertisement
JunosE 11.3.x Command Reference Guide N to Z
neighbor description
Syntax
Release Information
Description
Options
Mode
34
neighbor { ipAddress | ipv6Address | peerGroupName } description text
no neighbor { ipAddress | ipv6Address | peerGroupName } description
Command introduced before JunosE Release 7.1.0.
ipv6Address variable added in JunosE Release 8.0.0.
Associates a textual description with a BGP neighbor. The no version removes the
description.
ipAddress—IP address of BGP neighbor
ipv6Address—IPv6 address of BGP neighbor
peerGroupName—Name of a BGP peer group. If you specify a BGP peer group by using
the peerGroupName argument, all the members of the peer group inherit the
characteristic configured with this command, unless it is overridden for a specific peer.
text—Up to 80 characters of text that describes the neighbor
Address Family Configuration, Router Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
