JunosE 11.3.x Command Reference Guide N to Z
nas-port-type atm
Syntax
Release Information
Description
Options
Mode
20
nas-port-type atm { adsl-cap | adsl-dmt | idsl | sdsl | xdsl | cable | wireless-80211 |
wireless-cdma | wireless-umts | wireless-1x-ev | wireless-other | iapp | value }
no nas-port-type atm
Command introduced before Release 7.1.0.
Specifies the RADIUS NAS-Port-Type attribute (61) used for ATM interfaces. The no
version removes the NAS-Port-Type setting.
adsl-cap—Asymmetric DSL, Carrierless Amplitude Phase Modulation
adsl-dmt—Asymmetric DSL, Discrete Multi-Tone
idsl—ISDN DSL
sdsl—Symmetric DSL
xdsl—DSL of unknown type
cable—Cable
wireless-80211—Wireless 802.11
wireless-cdma—Wireless code division multiple access (CDMA)
wireless-umts—Wireless universal mobile telecommunications system (UMTS)
wireless-1x-ev—Wireless 1xEV
wireless-other—Wireless other
iapp—Inter Access Point Protocol (IAPP)
value—Number in the range 0–65535
AAA Profile Configuration
Copyright © 2010, Juniper Networks, Inc.
Need help?
Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 and is the answer not in the manual?