Radius Remote-Circuit-Id-Delimiter - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

radius remote-circuit-id-delimiter

Syntax
Release Information
Description
Options
Mode
342
radius remote-circuit-id-delimiter delimiter
no radius remote-circuit-id-delimiter
Command introduced before JunosE Release 7.1.0.
Specifies the delimiter character that sets off components in the PPPoE remote circuit
ID value sent from a DSLAM and captured on the router. The no version restores the
default delimiter character, #.
delimiter—Special character (for example, ! or %) to set off components in the PPPoE
remote circuit ID value captured from a DSLAM; the default delimiter character is #
Global Configuration
Copyright © 2010, Juniper Networks, Inc.