Show Interfaces Lag - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

show interfaces lag

Syntax
Release Information
Description
Options
Mode
706
show interfaces interfaceType interfaceSpecifier lag [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays information about a specified Ethernet member link in an IEEE 802.3ad link
aggregation group (LAG) bundle.
interfaceType—One of the following interface types listed in Interface Types and
Specifiers on page 5
fastEthernet
gigabitEthernet
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Copyright © 2010, Juniper Networks, Inc.