Set Ip Service-Profile - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

set ip service-profile

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
set ip service-profile profileName
no set ip service-profile
Command introduced before JunosE Release 7.1.0.
Specifies the name of a subscriber's service profile that is used in the route map. The no
version removes the service profile from the route map.
profileName—Name of service profile
Route Map Configuration
Chapter 7: S Commands
497