Show Ip Vrrp Neighbor - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

show ip vrrp neighbor

Syntax
Release Information
Description
Options
Mode
880
show ip vrrp neighbor [ interface interfaceType interfaceSpecifier [ vrid ] ] [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays summary of all neighbors known to the VRRP router configured on the specified
interface. A neighbor—a router that shares a given VRID with the VRRP router—is known
to the VRRP router only when the neighbor becomes a master for an IP address and
sends VRRP advertisements to that effect. If a router sharing the VRID has not yet become
a master, then the local router remains unaware of this neighbor and this command does
not display that neighbor.
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
vrid—Virtual router ID
filter—See Filtering show Commands on page 4
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.