JunosE 11.3.x Command Reference Guide N to Z
ppp ipcp lockout
Syntax
Release Information
Description
Mode
220
[ no ] ppp ipcp lockout
Command introduced in JunosE Release 11.0.0.
Terminates invalid IPv4 subscribers and prevents additional IPCP negotiations. The
subscriber can negotiate IPv4 addresses, IPv6 addresses, or both. When Internet Protocol
version 6 Control Protocol (IPv6CP) is active, this command enables unused IPv4
addresses, which are allocated for the IPv6 subscribers, to be available for the IPCP
services for an internally defined time interval (10 seconds). When the time interval
elapses, the subscriber must connect again to negotiate IPCP. The no version disables
the lockout option.
Interface Configuration, Profile Configuration, Subinterface Configuration
Copyright © 2010, Juniper Networks, Inc.