Show Atm Subinterface - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show atm subinterface

Syntax
Release Information
Description
Options
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
show atm subinterface
[ summary | atm interfaceSpecifier | summary atm interfaceSpecifier |
status operatingStatus ] [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays the current state of all ATM subinterfaces that you specify.
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
summary—Specifies that summary information is displayed
status—Displays information only for the ATM subinterfaces with the specified operating
status
operatingStatus—One of the following operating states:
dormant
dormantLockout
down
lowerLayerDown
notPresent
up
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Configuring an MPLS Pseudowire with VCC Cell Relay Encapsulation and Monitoring
ATM Subinterfaces for Layer 2 Services over MPLS in the JunosE BGP and MPLS
Configuration Guide
Chapter 7: S Commands
559