set dhcp relay assign-giaddr-source-ip
Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] set dhcp relay assign-giaddr-source-ip
Command introduced in JunosE Release 7.1.0.
Configures DHCP relay and DHCP relay proxy to assign the gateway IP address (giaddr)
to the source IP address of traffic they send to DHCP servers. The no version restores the
default, in which the DHCP relay and DHCP relay proxy do not assign the giaddr to the
source IP address.
Global Configuration
Chapter 7: S Commands
481