Shared-Shaping-Rate - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

shared-shaping-rate

Syntax
Release Information
Description
Options
518
shared-shaping-rate sharedShapingRate [ operator operandValue ]* [ bps | kbps ]
[ burst burstSize [ milliseconds | bytes ] ] { simple | compound | auto }
[ explicit-constituents ]
shared-shaping-rate operandValue [ operator operandValue ]* [ bps | kbps ]
[ burst burstSize [ milliseconds | bytes ] ] { simple | compound | auto }
[ explicit-constituents ]
no shared-shaping-rate
Command introduced before JunosE Release 7.1.0.
operator and operandValue variables added in JunosE Release 7.1.0.
milliseconds and bytes keywords added in JunosE Release 7.1.0.
bps and kbps keywords added in JunosE Release 8.0.0.
Sets the shared-shaping rate and burst size for the logical interface. This command must
appear in the scheduler profile for either the best-effort queue or the best-effort scheduler
node. The no version deletes the shared-shaping rate.
sharedShapingRate—Constant shared-shaping rate in bits per second or kilobits per
second; in the range 1–1000000000 bps/kbps. You can set the shaping rate to vary
from 1 bps to 1000 gbps (which is denoted by entering 1000000000 kbps in the CLI
for this command).
operator—Mathematical function
operandValue—Input for the operator; can be a QoS parameter definition name or an
integer
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
bps—Specifies shared-shaping rate in bits per second
kbps—Specifies shared-shaping rate in kilobits per second
NOTE: The lower and higher limits for the shaping rate range apply to both
the bps and kbps keywords available with this command. For example, if
you want to set the shaping rate to 1 mbps, you can either enter 1000 as
the value for the shapingRate argument and suffix it with the kbps keyword,
or enter 1000000 as the value for the shapingRate argument and suffix it
with the bps keyword. Both the methods of configurations result in the
same shaping rate value to be set.
burstSize—Number, in the range 0–522240 (0–510 KB); 0 enables the router to select
an applicable default value
milliseconds—Specifies burst size in milliseconds
Copyright © 2010, Juniper Networks, Inc.