JunosE 11.3.x Command Reference Guide N to Z
show ipv6 ospf neighbors
Syntax
Release Information
Description
Options
Mode
930
show ipv6 ospf [ areaId | areaIdInt ] neighbors [ neighborAddress ]
[ interfaceType interfaceSpecifier ] [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays a list of OSPFv3 neighbors.
areaId—OSPF area ID in IP address format
areaIdInt—OSPF area ID as a decimal value (0–4294967295)
neighborAddress—Router ID of a specified neighbor
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Copyright © 2010, Juniper Networks, Inc.