Set Dhcp Relay Max-Client-Packet-Rate - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

set dhcp relay max-client-packet-rate

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] set dhcp relay max-client-packet-rate [ packetsPerSecond ]
Command introduced in JunosE Release 11.2.0.
Configures DHCP relay to limit the maximum number of client packets that DHCP relay
processes per second. The no version returns to the default, in which DHCP relay processes
4096 packets per second.
packetsPerSecond—Number of client packets that are processed per second in the
range 0–4096.
Global Configuration
Chapter 7: S Commands
485