Set Weight - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

set weight

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] set weight value
no set weight
Command introduced before JunosE Release 7.1.0.
Specifies the BGP weight for the routing table. Overrides the weights assigned by using
the neighbor weight and neighbor filter-list commands. The no version removes the set
clause from a route map.
value—Weight value in the range 0–4294967295
Route Map Configuration
Chapter 7: S Commands
513