Receive-Window - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

receive-window

Syntax
Release Information
Description
Options
Mode
364
receive-window receiveWindowSize
no receive-window
Command introduced before JunosE Release 7.1.0.
Configures the L2TP receive window size (RWS) for a tunnel on the LAC (in Domain Map
Tunnel Configuration and Tunnel Group Tunnel Configuration modes) or on the LNS (in
L2TP Destination Profile Host Configuration mode). The RWS is the number of packets
that the peer can transmit without receiving an acknowledgment from the router. The
no version reverts to the systemwide RWS setting configured with the l2tp tunnel
default-receive-window command.
receiveWindowSize—Tunnel receive window size, in packets; currently, the only
supported value is 4
Domain Map Tunnel Configuration, L2TP Destination Profile Host Configuration, Tunnel
Group Tunnel Configuration
Copyright © 2010, Juniper Networks, Inc.