Show Ip Pim Dense-Mode Sg-State - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

show ip pim dense-mode sg-state

Syntax
Release Information
Description
Options
Mode
844
show ip pim dense-mode sg-state
[ group groupAddress [ source sourceAddress ] ] [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays information for each SG entry that PIM dense mode knows about.
groupAddress—IP address of a multicast group
sourceAddress—IP address of a multicast source
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Copyright © 2010, Juniper Networks, Inc.