show aaa accounting default
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
show aaa accounting { subscriberType } default [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays the AAA accounting method used for the particular type of subscriber.
subscriberType—Specifies the type of subscriber:
atm1483—ATM 1483 subscribers
ip—IP subscriber management interfaces
ipsec—IPSec subscribers
ppp—PPP subscribers
radius-relay—RADIUS relay subscriber
tunnel—Tunnel subscribers
filter—See Filtering show Commands on page 4
Privileged Exec
Chapter 7: S Commands
521