Pppoe Duplicate-Protection - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

pppoe duplicate-protection

Syntax
Release Information
Description
Mode
246
[ no ] pppoe duplicate-protection
Command introduced before JunosE Release 7.1.0.
Sets up the router to prevent a client from establishing more than one session using the
same MAC address. The no version disables this feature, and is the default setting for
PPPoE sessions that do not contain the IWF-Session DSL VSA (26–254) in the PPPoE
Active Discovery Request (PADR) packet sent from PPPoE clients to the access
concentrator.
Profile Configuration, Subinterface Configuration
Copyright © 2010, Juniper Networks, Inc.