Table of Contents
Advertisement
path overhead j1
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
For channelized OCx/STMx interfaces:
[ no ] path pathChannel overhead j1 { msg | exp-msg } [ message ]
For unchannelized OCx/STMx interfaces:
[ no ] path overhead j1 { msg | exp-msg } [ message ]
Command introduced before JunosE Release 7.1.0.
Specifies trace messages to check for connectivity between the router and the
SONET/SDH device at the other end of the line. The no version restores the default
situation, in which all characters of the trace message are zeros.
pathChannel—Number, in the range 1–2147483648, that identifies the path on a
channelized interface
msg—Specifies that the message is one that the router sends
exp-msg—Specifies that the message is one that the router expects to receive
message—Text of the message; the maximum is 15 characters for SDH mode and 62
characters for SONET mode
Controller Configuration
Chapter 4: P Commands
179
Advertisement
Table of Contents
