JunosE 11.3.x Command Reference Guide N to Z
service manual-commit
Syntax
Release Information
Description
Mode
464
[ no ] service manual-commit
Command introduced before JunosE Release 7.1.0.
Stops the router from automatically saving configuration changes to nonvolatile storage.
Places the router into Manual Commit mode; this mode has no effect on the CLI prompt.
Causes an immediate save of configuration data not yet committed to nonvolatile storage.
If you issue this command while high availability is initializing, the CLI notifies you of the
state and requests that you try again later. The no version returns the E Series router to
Automatic Commit mode (with no effect on the CLI prompt).
Global Configuration
Copyright © 2010, Juniper Networks, Inc.