Ppp Multilink Multiclass Reassembly - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

ppp multilink multiclass reassembly

Syntax
Release Information
Description
Options
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
[ no ] ppp multilink multiclass reassembly [ trafficClassName ]*
Command introduced in JunosE Release 11.1.0.
Enables reassembly on a specified multilink class. The maximum received reconstructed
unit (MRRU) value of each class is the same as that of the MLPPP link. The no version
disables reassembly on all multilink classes, or on the specified multilink classes if you
include one or more traffic class names.
trafficClassName—Name of a QoS traffic class. You can enable reassembly for up to
eight traffic classes. You must specify the best-effort traffic class in the command or
the command fails.
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
Interface Configuration, Profile Configuration, Subinterface Configuration
Configuring Multiclass MLPPP
Configuring Reassembly on Multiclass MLPPP Interfaces
Chapter 4: P Commands
233