Show Clns - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

show clns

Syntax
Release Information
Description
Options
Mode
630
show clns [ es-neighbors | is-neighbors ] [ interfaceType interfaceSpecifier ]
[ detail ] [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays information about the CLNS network.
es-neighbors—Displays IS-IS related information for IS-IS end-system adjacencies.
Neighbor entries are sorted according to the area in which they are located.
is-neighbors—Displays IS-IS related information for IS-IS intermediate-system
adjacencies. Neighbor entries are sorted according to the area in which they are located.
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
detail—Displays area addresses and IP addresses; if not specified, a summary display
is provided
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Copyright © 2010, Juniper Networks, Inc.