Show Bgp Ipv6 Neighbors Dampened-Routes - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show bgp ipv6 neighbors dampened-routes

Syntax
Release Information
Description
Options
Copyright © 2010, Juniper Networks, Inc.
show bgp ipv6
[ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName | route-target signaling ]
neighbors { ipAddress | ipv6Address } dampened-routes [ fields { fieldOptions } ]
[ delta ] [ filter ]
Command introduced before JunosE Release 7.1.0.
ipv6Address variable added in JunosE Release 8.0.0.
route-target signaling keywords added in JunosE Release 8.2.0.
Displays information about IPv6 BGP routes with a dampening history for the specified
BGP neighbor.
unicast—Specifies the IPv6 unicast address family and routing table; the default option
multicast—Specifies the IPv6 multicast address family and routing table
vpnv6 all—Specifies the VPN-IPv6 address family and all IPv6 VPN routing and
forwarding instances
vpn6 vrf vrfName—Specifies the VPN-IPv6 address family and only the IPv6 VPN
routing and forwarding instance with the name vrfName
route-target signaling—Specifies the route-target address family
ipAddress—IP address of a neighbor whose routes the router has learned
ipv6Address—IPv6 address of a neighbor whose routes the router has learned
fields—Displays only the specified fields; the display order of the fields is hard-coded
and not affected by the order in which you enter them
fieldOptions—Fields to be displayed, in the format
all | [ afi | aggregator | as-path | atomic-aggregate | best | clusters | communities |
extended-communities | imported | intro | in-label | loc-pref | med | next-hop |
next-hop-cost | origin | originator-id | out-label | peer | peer-type | rd | safi | stale |
unknown-types | weight ]*
all—All available information; not recommended, because this information for each
network does not fit on a single line and is difficult to read
afi—Address family identifier
aggregator—AS number and IP address of aggregator
as-path—AS path through which this route bas been advertised
atomic-aggregate—Whether the atomic aggregate attribute is present
best—Whether this is the best route for the prefix
clusters—List of cluster IDs through which the route has been advertised
communities—Community number associated with the route
Chapter 7: S Commands
589