Path Ds3 T1 Framing - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

path ds3 t1 framing

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
path pathChannel ds3 ds3Channel t1 t1Channel framing framingType
no path pathChannel ds3 ds3Channel t1 t1Channel framing
Command introduced before JunosE Release 7.1.0.
Configures the framing format for a T1 channel on a DS3 signal. This command applies
to a T1 channel on a DS3 over channelized SONET interface. The no version restores the
default value.
pathChannel—Number, in the range 1–2147483648, that identifies the path
ds3Channel—Number, in the range 1–3, that identifies the DS3 channel
t1Channel—One or more individual T1 channels, ranges of T1 channels, or combination
of individual channels and ranges, in the range 1–28 (no spaces); for example,
3,7-15,19-13,27
framingType—One of the following types:
esf—Default; specifies extended superframe
sf—Specifies superframe
Controller Configuration
Chapter 4: P Commands
171