Show L2Tp Dial-Out - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

show l2tp dial-out

Syntax
Release Information
Description
Options
Mode
974
show l2tp dial-out [ [ detail ] [ state operState ] | summary ] [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays the chassis-wide configuration, operational state, and statistics for L2TP dial-out.
detail—Displays configuration, states, and statistics
operState—One of the following operational states:
inService
initIncomplete
restricted
summary—Displays aggregate counts for virtual routers, targets, and sessions in each
of the possible operational and administrative states
filter—See Filtering show Commands on page 4
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.