Table of Contents
Advertisement
JunosE 11.3.x Command Reference Guide N to Z
neighbor lenient
Syntax
Release Information
Description
Options
Mode
42
[ no ] neighbor { ipAddress | ipv6Address | peerGroupName } lenient
Command introduced before JunosE Release 7.1.0.
ipv6Address variable added in JunosE Release 8.0.0.
Enables lenient behavior to make the BGP speaker more tolerant of malformed packet
and finite state machine errors generated by peer, so that the speaker can attempt
recovery from the error and avoid bringing down the session. The no version disables
lenient behavior; this is the default condition.
ipAddress—IP address of BGP neighbor
ipv6Address—IPv6 address of BGP neighbor
peerGroupName—Name of a BGP peer group. If you specify a BGP peer group by using
the peerGroupName argument, all the members of the peer group inherit the
characteristic configured with this command, unless it is overridden for a specific peer.
Address Family Configuration, Router Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
