Neighbor Advertisement-Interval - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

neighbor advertisement-interval

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
neighbor { ipAddress | ipv6Address | peerGroupName } advertisement-interval seconds
no neighbor { ipAddress | ipv6Address | peerGroupName } advertisement-interval
[ seconds ]
Command introduced before JunosE Release 7.1.0.
ipv6Address variable added in JunosE Release 8.0.0.
Sets the minimum interval between the sending of BGP updates for a given prefix. The
no version restores the default interval.
ipAddress—IP address of BGP neighbor
ipv6Address—IPv6 address of BGP neighbor
peerGroupName—Name of a BGP peer group. If you specify a BGP peer group by using
the peerGroupName argument, all the members of the peer group inherit the
characteristic configured with this command, unless it is overridden for a specific peer.
seconds—Interval in seconds between update messages; in the range 0–600; default
value is 30 seconds for external peers and 5 seconds for internal peers
Address Family Configuration, Router Configuration
Chapter 2: N Commands
25